Scratch Removal, Dual Action Polisher and Shine
#1
Scratch Removal, Dual Action Polisher and Shine
Here are some photos of what you can do with a good Dual Action Polisher, such as the Porter Cable 7424. The random orbit action of thesix-inch polishing pad provides a smooth, swirl-free finish. You do not have to worry about burning the paint due to this.
I had been doing some wheeling in West Virginia and got quite a few scratches. Some quite deep, at least deep enough that you could feel it with your fingernail.
Example #1:
Example #2:
Example #3:
Example #4:
After a couple of pressure washes and then a hand wash, it was ready to start.
The pads for the PC polisher come in different colors, which relate somewhat to how abrasive they are.
I started with a yellow pad and a fairly abrasive compound by Poor Boys, SSR3.
After going over the H3 with that setup, I moved to a Orange Pad and much less abrasive Zaino Fusion, Paint Cleaner Swirl Remover.
Between these two pads and compounds, the scratches were either gone or sufficiently reduced, you could hardly see them. I can look under just the right light and may see what is left of the deepest scratches, but most would not have a clue.
From that I moved to another Zaino product. It is designed to help fill some mirco scratches and swirls. It is the Z-5 polish. Two coats of this using the Grey pad. In between each coat, I applied Z-6, Gloss Enhancer, by hand usinga mircofibertowel,which helps remove any residue of the Z-5 and adds to the overall shine. Then came two coats of Z-2 Polishusing the blue pad, also from Zanio. After each coat of Z-2, I also used the Z-6 Gloss Enhancer.
And here are the results.
[font="trebuchet ms"]Still working the buff
I had been doing some wheeling in West Virginia and got quite a few scratches. Some quite deep, at least deep enough that you could feel it with your fingernail.
Example #1:
Example #2:
Example #3:
Example #4:
After a couple of pressure washes and then a hand wash, it was ready to start.
The pads for the PC polisher come in different colors, which relate somewhat to how abrasive they are.
I started with a yellow pad and a fairly abrasive compound by Poor Boys, SSR3.
After going over the H3 with that setup, I moved to a Orange Pad and much less abrasive Zaino Fusion, Paint Cleaner Swirl Remover.
Between these two pads and compounds, the scratches were either gone or sufficiently reduced, you could hardly see them. I can look under just the right light and may see what is left of the deepest scratches, but most would not have a clue.
From that I moved to another Zaino product. It is designed to help fill some mirco scratches and swirls. It is the Z-5 polish. Two coats of this using the Grey pad. In between each coat, I applied Z-6, Gloss Enhancer, by hand usinga mircofibertowel,which helps remove any residue of the Z-5 and adds to the overall shine. Then came two coats of Z-2 Polishusing the blue pad, also from Zanio. After each coat of Z-2, I also used the Z-6 Gloss Enhancer.
And here are the results.
[font="trebuchet ms"]Still working the buff
#7
RE: Scratch Removal, Dual Action Polisher and Shine
LOOKS AWESOME.... that stuff really worked.... well
Did you try it on your phone??
and for those playing along at home... Wendell wheeled his ride so hard that he scratched his phone...
Did you try it on your phone??
and for those playing along at home... Wendell wheeled his ride so hard that he scratched his phone...