Nice rig, do you want to challenge Hummerbob 'pavement princess'?[sm=badbadbad.gif]

 

[sm=icon_quiet.gif][sm=icon_quiet.gif][sm=icon_quiet.gif]

 

not really compete hehe.... i still want to lift is and put offroad tires on. its just that the tires are like 500 each for 37/24 tires and 3k for the lift ..

 

I just wanna know ..what's Bob doing here in the H3 threads again???


Blahhahahahahahha!!!!

 

I know I know. These damn guys with H2's coming onto an H3 site. Wait!! I have an H2. I outta here!

 

 

Bob didncha read. Were not welcome here anymore.

 

FoCk 'em, FoCK 'EM ALL!!!! [sm=chairshot.gif][sm=icon_beat.gif][sm=icon_stickpoke.gif][sm=shootshoot.gif]

 

Got pics?

I think going big and black is the way to do.

Wolfgangsta, I think you should Donk that bitch out, fu sho. 31's, son! Hell Yeah, The bitches luvs 'em some circumference, Dog!

King of Da 'Burbs!
Ghetto Revival.

I'm a Entity, I'm tryin' to get this franchise rollin'.

 

ok.....looks like the wheels I wanted to go with aren't going to work. It seems as if the H3 has a center bore of 100mm, and the wheels I wanted have a smaller bore than that. They do have them with the correct center bore, but the offset is 35. That will push my inner edge of the tire inward by almost 6/10ths of an inch. I'm afraid of rubbing issues if I go with a 325/50-22 tire. (That's what all the wheel sellers are telling me that I might have problems with.)

So, I guess it boils down to this.........
I've read where IMPORTKILLER says, and I quote....."as long as your rim/tire combo measure no more than 35" tall and 12.5 wide they should fit. Make sure you get +38 or less offset rims with a backspace around 5."

Will these wheels work? How do I figure the backspacing? Is it figured by rim width divided by 2 (to get the center of the wheel), then add in the positive offset of 35mm....then figure that distance back to the edge of the rim? If so, I'm coming up with 6.12 backspacing. (22x9.5 wheel with +35 offset...is that right?)

If you can't tell, I'm getting frustrated trying to get 22's on this thing, with the proper center bore of 100mm and use a 325/50-22 tire without having rubbing issues. (Yes, I will turn the nuts to raise the front an inch or two if needed)

Can someone help? Is it possible to run this combo? If not, what others in here have used 22" rims with a "big" tire and no major suspension / body lifts?

Thanks in advance for all of your help!