hey guys. Id like to do a body lift. Is there a reason why i can only find 1" body lift blocks?
I run 305/75/16 baja claws and would like more clearance when tight turning while 4wding. Has anyone done this?

 

I did a 1" body lift on my H3. You really can't go any higher without running into problems with the length of brake & ABS lines and some other wiring, along with the steering shaft angles.

Body lifting, no matter how high you go, is not going to cure the major rubbing point in tight turns. That would be the sway bar. The sway bar doesn't move with the body.

 

Ok, so did the 1" body lift do much? Are you runung stock suspension?
Iv got the oldmanemu 2" lift by arb. Goes ok but iv had the bushes replaced about 5 time due to
The steel bushes not being pressed properly. What size tires do you run? Cheers mate

 

Stock suspension, torsion bar adjustment to level the front. Trailduty 1/2" extended bump stops & Rancho shocks on front, OEM shocks on rear. Daystar 1" body lift.
315/75/16 Goodyear Duratrac tires on OEM rims.