Hitch install today...Horrible service..Now eng light and other issues!
#11
I noticed another problem. My auto headlights stay on all the time now, day or night. im going up there at lunch to talk with the owner...Check eng light still on also... Grrrrr.... Im so frustrated. Thanks again all for the input and advise...
#12
Update: Delt with owner of shop. He pulled the 7 way out and apart and found that one of the wires were on the wrong pin....he called the kid over that did the install and chewed his butt for the wrong install and also let him have it for not checking his work with the test trailer lights they have to make sure everything is working correctly. He still is not sure how they blew the fuses but they double checked it all and its working properly.. Now on to the eng light... they assure me nothing they did has anything to do with the light. They checked the code on there handheld scanner and its showing that the emmisions canister purge control valve malfuntion.. they re-set the light but it comes right back. So off to the dealer I go.
#13
the old shorted cable trick
when you look down and see the bundle,THATS where THE FACTORY MOUNTING CLIP IS THAT CAUSES THE CABLE TO SHORT TO THE FRAME!!.
discussed here last year. it would be a real coincidence that it shorted,as they were doing the job.
the fix,is to push up on the cable,and forward till it cliks loose.
leave it alone at that point. everyone should do that,RIGHT NOW!! preventive maintenance!!
discussed here last year. it would be a real coincidence that it shorted,as they were doing the job.
the fix,is to push up on the cable,and forward till it cliks loose.
leave it alone at that point. everyone should do that,RIGHT NOW!! preventive maintenance!!
#14
when you look down and see the bundle,THATS where THE FACTORY MOUNTING CLIP IS THAT CAUSES THE CABLE TO SHORT TO THE FRAME!!.
discussed here last year. it would be a real coincidence that it shorted,as they were doing the job.
the fix,is to push up on the cable,and forward till it cliks loose.
leave it alone at that point. everyone should do that,RIGHT NOW!! preventive maintenance!!
discussed here last year. it would be a real coincidence that it shorted,as they were doing the job.
the fix,is to push up on the cable,and forward till it cliks loose.
leave it alone at that point. everyone should do that,RIGHT NOW!! preventive maintenance!!
Im sorry maybe Im slow this morning. Can you give me some more details. Look down where? Do you mean break it loose from the mounting?
#15
you might just lay down,look up on drivers side. you see a cable that is clipped to the bumper/frame? in such a way it rubs and will wear thru. i just pushed up and forward till it unhooked and the binding ended. that was reported last yr on my o7. i got a 10 and did the same thing. they are all the same,and are a breakdown waiting to happen. a time bomb!!
look,maybe you wll take pix huh?
look,maybe you wll take pix huh?
#16
they assure me nothing they did has anything to do with the light. They checked the code on there handheld scanner and its showing that the emmisions canister purge control valve malfuntion..
usually the newest problem shows up at or near the last place some "x pert"did something
Last edited by drtom; 03-17-2012 at 06:48 PM.
#17
Nothing makes me more mad than incompetence!
Good luck man. Keep us posted.
Thread
Thread Starter
Forum
Replies
Last Post
JRAguilar
PRIVATE For Sale / Trade Classifieds
1
06-07-2012 02:42 PM
cannoncollector
PRIVATE For Sale / Trade Classifieds
8
08-16-2011 07:11 PM
baffa
PRIVATE For Sale / Trade Classifieds
32
09-17-2009 11:51 AM
Steve_H3
PRIVATE For Sale / Trade Classifieds
6
05-22-2007 04:14 AM