high beams don't work!
#11
RE: high beams don't work!
Multifunction switch is working fine. However when I switch to high beams the driving lights go out and the amount of the light in front of the truck has very little or no change in brightness , or the amount of light projected in front of the vehicle . I hope to find a resolution for this soon since a drive a lot on country roads at night. Maybe its just the driving lights and the headlights together are just as bight as the high beams and therefore I'm unable to see a difference between the two. Who knows?
Thanks
Thanks
#12
RE: high beams don't work!
ORIGINAL: 08h3alpha
Multifunction switch is working fine. However when I switch to high beams the driving lights go out and the amount of the light in front of the truck has very little or no change in brightness , or the amount of light projected in front of the vehicle . I hope to find a resolution for this soon since a drive a lot on country roads at night. Maybe its just the driving lights and the headlights together are just as bight as the high beams and therefore I'm unable to see a difference between the two. Who knows?
Thanks
Multifunction switch is working fine. However when I switch to high beams the driving lights go out and the amount of the light in front of the truck has very little or no change in brightness , or the amount of light projected in front of the vehicle . I hope to find a resolution for this soon since a drive a lot on country roads at night. Maybe its just the driving lights and the headlights together are just as bight as the high beams and therefore I'm unable to see a difference between the two. Who knows?
Thanks
Had to check the beam patterns on the garage wall to make sure everything was
working.
I can't find them in the On-Line catalog, but 4WP offers a kit in their hard copy
catalog that will allow for the simultaneous use of , low/high beams and or
driving lights and high beams... I'll dig up the catalog and see if I can find
some part numbers.
#13
RE: high beams don't work!
Have you tried the garage door test like gunner. Pull up to the garage door and cycle through hi/low
to see if theres a change. Turn your driving/fog lights off, might be easier to see a difference with
them off. Off topic, has anyone used the Hid replacement. Don't know if it would be worth it or not.
to see if theres a change. Turn your driving/fog lights off, might be easier to see a difference with
them off. Off topic, has anyone used the Hid replacement. Don't know if it would be worth it or not.
#14
RE: high beams don't work!
Gunner, are you talking about the Painless wiring kits for 4 headlight vehicles, and universal kits for auxillary lighting? They have good stuff and easy to install, but they show no specific part for H2s or 3s. [&o]
Link http://www.painlessperformance.com/index.php
Link http://www.painlessperformance.com/index.php
#16
RE: high beams don't work!
sorry for my delay in response. I have done the garage test with no response. no click or slight flash while it switches bulbs. The only change is my driving lights go off and that's it. I also got out and checked the headlights and the same bulb appears to be illuminated.
#17
RE: high beams don't work!
ORIGINAL: Doc Olds
Gunner, are you talking about the Painless wiring kits for 4 headlight vehicles, and universal kits for auxillary lighting? They have good stuff and easy to install, but they show no specific part for H2s or 3s. [&o]
Link http://www.painlessperformance.com/index.php
Gunner, are you talking about the Painless wiring kits for 4 headlight vehicles, and universal kits for auxillary lighting? They have good stuff and easy to install, but they show no specific part for H2s or 3s. [&o]
Link http://www.painlessperformance.com/index.php
post it under another cover.........
#18
RE: high beams don't work!
Sounds like you need to take this issue to you dealer and show them your trouble with the highbeams When I done the garage test the high beams worked but they still suck.
ORIGINAL: Ripskip
sorry for my delay in response. I have done the garage test with no response. no click or slight flash while it switches bulbs. The only change is my driving lights go off and that's it. I also got out and checked the headlights and the same bulb appears to be illuminated.
sorry for my delay in response. I have done the garage test with no response. no click or slight flash while it switches bulbs. The only change is my driving lights go off and that's it. I also got out and checked the headlights and the same bulb appears to be illuminated.
#19
RE: high beams don't work!
I rarely use High Beam, but tonight I tried them out. I could not see any better with the high beams vs low and driving lights.Could I purchase a different bulb and improve this or would I have to get a harness and modify the factory setup?
Thread
Thread Starter
Forum
Replies
Last Post
Hummer_H3T_Alpha
PRIVATE For Sale / Trade Classifieds
1
07-13-2012 11:47 PM
bigbillystyle
PRIVATE For Sale / Trade Classifieds
2
07-08-2009 10:17 AM