H3 Alpha engine overheat
#1
H3 Alpha engine overheat
Yesterday I ran the truck on sand for1 minute at full throttle, 5-6k rpm, using the 4low, the engine temperature was on red at full. Is it normal? I checked the coolant level, was ok.
Any ideas?
Thanks in advance
Any ideas?
Thanks in advance
#4
RE: H3 Alpha engine overheat
i've never had to run in 4lo in sand and i got some pretty soft stuff just down the road from me,,, rarely even have to use 4lock.. i'm sure in 4lo your just overreving and probably digging ina lot more
even with the stock tires (which are good in sand) you shouldn't have any issues,,, i've already pulled out a couple of "jeeps" from the soft stuff [:-]
even with the stock tires (which are good in sand) you shouldn't have any issues,,, i've already pulled out a couple of "jeeps" from the soft stuff [:-]
#5
RE: H3 Alpha engine overheat
Run it in high lock. If the same thing happens, get it looked at.
Try to keep the revs down also. Beating the crap out of your engine for extended periods of time can't be all that good for it.
Oh and I believe the Alpha redlines at around 5800?
Try to keep the revs down also. Beating the crap out of your engine for extended periods of time can't be all that good for it.
Oh and I believe the Alpha redlines at around 5800?
#7
RE: H3 Alpha engine overheat
As everyone else has pretty much said, you shouldn't need anything more the 4Hi. Higher RPM's will dig more than crawling across the top of the sand IME. Alot depends on individual exp and situation.
#8
RE: H3 Alpha engine overheat
yes, it will heat up fast if your revving that high in 4low. like the others said, 4high lock is good for sand. 4 low lock is for very slow off roading only and your rpm's should be kept low.