PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!

H2 need help

Thread Tools
 
Search this Thread
 
  #1  
Old 09-23-2012 | 09:47 PM
googie714's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 10
Default H2 need help

OK need some help, center marker lights front and rear do not work also mirrors work but will not fold in, air compressor not working

2003 H2
thanks
 
  #2  
Old 09-23-2012 | 11:03 PM
KA H2's Avatar
Junior Member
Joined: Sep 2012
Posts: 29
From: Austin, TX
Default

Check your fuses and relays first.
 
  #3  
Old 09-24-2012 | 11:20 AM
googie714's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 10
Default

fuses and relays all good did that first
thanks
 
  #4  
Old 09-24-2012 | 05:40 PM
Pauldy's Avatar
Senior Member
Joined: May 2010
Posts: 287
From: Plano, Texas
Default

If you search the forums there are all kinds of issues with the mirrors so knowing what your particularly experiencing is hard to tell. It can be anything from just the motors locking up to the point of requiring total replacements to something as a simple as a loose wire harness.

Do you have pictures of your mirrors?
 
  #5  
Old 09-24-2012 | 05:43 PM
Pauldy's Avatar
Senior Member
Joined: May 2010
Posts: 287
From: Plano, Texas
Default

Also for the marker lights, have you tried replacing them? I have an 03 and replaced all mine a few months ago.
 
  #6  
Old 09-24-2012 | 05:50 PM
Pdmiller's Avatar
Member
Joined: Sep 2012
Posts: 51
From: Orting, Washington
Default

my compressor does not work neither do the mirrors-- time to search
 
  #7  
Old 09-24-2012 | 09:55 PM
googie714's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 10
Default

Thanks
 
  #8  
Old 10-07-2012 | 10:55 PM
googie714's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 10
Default

all bulbs bad thank you!!!! i,am a dummy
 
  #9  
Old 10-08-2012 | 11:36 AM
Pauldy's Avatar
Senior Member
Joined: May 2010
Posts: 287
From: Plano, Texas
Default

NP might want to check gaskets too since you just changed them to make sure there is a good seal still or you might end up with water coming in next.
 
  #10  
Old 10-08-2012 | 05:54 PM
googie714's Avatar
Thread Starter
|
Junior Member
Joined: Sep 2012
Posts: 10
Default

ok if seals are bad how do you know, where can I get new ones also lost one of the clips that holds the light down where can I get one need help
 



All times are GMT -5. The time now is 05:32 AM.