I designed and built this Off-Road trailer to be a multitasking type trailer from hauling firewood to carrying essential camp gear, goods and certain ATV’s with wheel width less than 44”. Easily adaptable to accept a Car/Trailer Top Tent for convenient camping anywhere you may be and / or Surf Racks. Approx. 2300 lb capacity. I used this trailer on a test run to Ohio and back fully loaded with hunting gear twice this season. It worked PERFECTLY, UNFORTUNATELY I have to sell it as I need the cash.
Features include:
• HEAVY DUTY Frame: 2”x3” Tubular Construction. Primed w/FLAT
Black Paint on rails, inside box & deck. Outer sides of Side are a
Charcoal Gray Metallic.
• Box Frame: 44” wide X 5.6’ long Box Frame with steel floor. Also has
a 2” rear receiver.
• Deck: Extended tongue for easy towing backing and extra capacity.
Diamond Plate fore deck designed for additional space to
accommodate a cooler (Cooler Tie Down Straps Included), Tongue
Box with space to spare. Tie down loops on each side for auxiliary
fastening.
• 18" High Diamond Plate Sides with rear tail gate. Custom T/G clamp
guards prevent unintentional dis-engagement.
• 3500lb Axel and Springs with easy Grease Hubs. Shackles can be
mounted above the axel for an additional 3 to 4” of height.
• Custom Cover: Military Waterproof Fabric used for the custom
cover. (Tan/Camel in color).
• ALL Stainless Hardware.
• Stainless & Locking Hitch Pin.
• Stainless & Locking Receiver Pin.
• Inter-changeable Hitch Design: 2” Ball Hitch included. Can be
removed to accept any 2” articulating off-road hitch.
• NEW Fire extinguisher
• NEW Jerry Can GAS (Metal, Never filled) 5 US Gallon. With Secure
Metal Buckle Strap with Lock.
• NEW Jerry Can Water (Geeen Plastic/ Military Issue, Never filled)
With Secure Metal Buckle Strap with Lock.
• NEW Reese 48” Farm Jack: Never used. Custom Mount on Spare
Tire Carrier and easily removed/adjusted. Mount is removable &
adjustable in height and can be utilized for other purposes.
• NEW Spade Shovel mounted on Left Fender with custom mounting
brackets with lock for security.
• NEW Fiskars Axe mounted on Right Fender with custom mounting
brackets with lock for security.
• Tailgate opens and retained via chain with plastic cover. (2)
Custom Tailgate closures (clamps) with hitchpins to keep
clamps from opening on the trail.
• Spare Tire: 33” x 10.50” x 15” used with approx. 1/4” to 3/16” of
tread left.
• Tires: 33” x 10.50” x 15” used with approx. 1/4” to 3/16” of tread
left. (All were take off’s from my Jeep and have never been flat.
(NO PLUGS or Repairs). Larger Tires up to 35” x 12.50” will fit
within fender wells, with the removal of wheel spacers.
Shackles may have to be repositioned to the top of the axel
(easily done).
• Wheels: (including Spare) Steel 15” x 8” Jeep Wheels with a 5 x 4.5
lug pattern. I believe the 5 hole pattern will work for Ford
Wheels as well. (You may want to verify if necessary).
• Wheel Spacers: I added 1.5” Billet Aluminum Wheel Spacers that
can be removed should larger/wider tires and wider wheels be
desired.
• Custom Waterproof LED lighting include: Brake/Turn Lights:
(2) 4” Round Clear Lens RED LED’s.
Turn Signals: (2) 2” Round Clear Lens RED LED’s.
SIDE Running Lights: (2) 2” Round Clear Lens AMBER LED’s.
REAR Running Lights: (under Tailgate) (4) 2” Round Clear Lens
RED LED’s. ALL LED Lights are “Flush Fit” with Rubber Grommets.
ALL Wiring is professionally soldered, shrink tube wrapped and
sealed with a coating of liquid Electrical Tape for years of
service.
• Heavy Duty Swing down Jack: Bulldog Brand with easy ergonomically
friendly crank handle.

Asking: $3,500 as shown above. Negotiable.

Thanks

BTW, I am planning on a brand new paint job in Gloss Black Epoxy to be completed over Memorial Day Weekend.

Have numerous pictures if interested. thanks

Nick

 

That thing is pretty cool and looks to have exceptional craftsmanship. I don't need it, but if I did I'd buy it.

Good luck selling something with jeep plastered all over it on a hummer forum.