I have read previous threads on this problem. It seeemd easy enough so I tried to do it myself. I bought a resistor kit from orielly's connected the wires and the new resistor and blower will still not come on. I can post pictures maybe i wired them wrong or maybe the blower motor is out how can i tell before i buy the motor. The wiring harness from orielly's contained a red wire the old wiring harness contained to orange wires how can i tell which one goes to the red wire. Any information or suggestion would be appreciated.
thank you.

 

Does somebody have pictures of the new wiring harness hooked up? need help? Its hot as hell here in West Texas need that AC working.

 

12v goes to the top of the motor. everything else goes to ground,resistors,relay etc. you can ground wires to test motor.

you need to be looking at the wiring diagram.

motor fuse?

 

Where can I find the wiring diagram, I didn't receive anything but some connectors with the kit.

 

i hear you can download the svc manual free,,search..

 

here some pics to better see what I'm dealing with the old resistor was burnt and so was the connector I stripped the old wires and used wiring connectors to connect the new wires, I connected each wire by color and there where two oranges wires on the new wiring harnesss there was only one and an orange one. Is the motor fuse located on the same wiring harness located on pic 3. Please advise. I appreciate any response I really don't what to take it to the dealer especially in this boom town where every shop is packed and expensive.