Looking to upgrade my air intake
#13
The outside temp went up to 40 on Sunday and it was sunny, so I installed the AirDoc's intake and K&N filter. I have to tell you that the instructions were the best I have ever used and I write technical "how to's" for a living (well at least part of my day job).
I could only find two minor issues with them. One I needed a philips head screw driver and it was not listed on the tools sheet (I know, I'm nit picking) and I found it way easier to drill the screw hole while I had the box out and the sleeve was not installed. I could just drill all the way through it without worrying about cutting into the sleeve. I then installed the sleeve, then box, then the screw in the hole I drilled.
Everything went exactly as instructed and it was a very quick and clean install. Engine had a different, cleaner sound to it. Now I'm going to have to schedule the PCM upgrade to take full advantage of the all of the upgrades I have done.
Has anyone done a 1 inch body lift with an aftermarket intake was installed? Wondering if it needs any modifications or adjustments...
I could only find two minor issues with them. One I needed a philips head screw driver and it was not listed on the tools sheet (I know, I'm nit picking) and I found it way easier to drill the screw hole while I had the box out and the sleeve was not installed. I could just drill all the way through it without worrying about cutting into the sleeve. I then installed the sleeve, then box, then the screw in the hole I drilled.
Everything went exactly as instructed and it was a very quick and clean install. Engine had a different, cleaner sound to it. Now I'm going to have to schedule the PCM upgrade to take full advantage of the all of the upgrades I have done.
Has anyone done a 1 inch body lift with an aftermarket intake was installed? Wondering if it needs any modifications or adjustments...
#14
Does anyone experience more engine vibration with the AirDoc? I have the solid silicone like connectors on my system and they seem to add a lot more vibration to the truck. Is this normal? I'll update to the AirDoc one of these days but just wondering if that would be the same.
Last edited by Songman; 02-01-2012 at 05:19 PM.
#15
The outside temp went up to 40 on Sunday and it was sunny, so I installed the AirDoc's intake and K&N filter. I have to tell you that the instructions were the best I have ever used and I write technical "how to's" for a living (well at least part of my day job).
Has anyone done a 1 inch body lift with an aftermarket intake was installed? Wondering if it needs any modifications or adjustments...
Has anyone done a 1 inch body lift with an aftermarket intake was installed? Wondering if it needs any modifications or adjustments...
If you would like to start a new thread on this topic... basically something along the lines of what I made bold above, I will give you some info without high jacking the OP's thread. Others can pitch in as well.
#16
This is a good question about a little discussed (or thought out) issue with any body lift.
If you would like to start a new thread on this topic... basically something along the lines of what I made bold above, I will give you some info without high jacking the OP's thread. Others can pitch in as well.
If you would like to start a new thread on this topic... basically something along the lines of what I made bold above, I will give you some info without high jacking the OP's thread. Others can pitch in as well.
Thread
Thread Starter
Forum
Replies
Last Post
Luigi
PRIVATE For Sale / Trade Classifieds
3
08-28-2010 05:30 PM
mastercraft88
PRIVATE For Sale / Trade Classifieds
1
01-23-2010 09:37 PM