H3 bumper
#1
H3 bumper
Hey guys, we just finished and released our H3 front bumper and we are thinking of sponsoring the forum. We wanted to get some feedback on what the community thought about the H3 bumper first. Please feel free to comment.
#6
Looks like your guys' stuff.
I'm more fond of cleaner looking stuff, a cheaper 2nd version would be cool with out the tubing, and the top flat to fit the body line better. Then again i dont have 3k for a front bumper anyways.
I'm more fond of cleaner looking stuff, a cheaper 2nd version would be cool with out the tubing, and the top flat to fit the body line better. Then again i dont have 3k for a front bumper anyways.
#8
Ouch, $2700 and that's not retail yet? Not trying to be critical, but will there be a crowd looking for a bumper in that price? I've been talking back and forth with Christian from THOR parts and going over prices for custom bumpers; they (bumpers) really need to come in at much lower cost than that to sell and be profitable.
I modded my 3 to accept a Jeep Wrangler Fab Fours, which some think is missing the outer fender protection, and I felt it was a bit high priced at $700, which was heavily discounted. Originally I had hired a custom builder to make a bumper with a similar design as yours, though much less meaty, and that ticket was coming in at $1400 w/powder coating installed out the door. And I felt that was pretty steep.
What's the weight on your design? Weight's a huge factor on the massively underpowered 06's, not sure if it's much better for the 3.7L on later models.
I do like the lower portion of the bumper, I just think the tubing is way over the top and way too much for the smaller proporsions of the 3.
There's an older post on this forum covering my bumper buildup if you want to take a look at the original design I was going with to what I have now. You might be able to get an idea or two. If you want any pics, PM me, or even contact Christian at THOR parts for some of his ideas.
Good luck!
I modded my 3 to accept a Jeep Wrangler Fab Fours, which some think is missing the outer fender protection, and I felt it was a bit high priced at $700, which was heavily discounted. Originally I had hired a custom builder to make a bumper with a similar design as yours, though much less meaty, and that ticket was coming in at $1400 w/powder coating installed out the door. And I felt that was pretty steep.
What's the weight on your design? Weight's a huge factor on the massively underpowered 06's, not sure if it's much better for the 3.7L on later models.
I do like the lower portion of the bumper, I just think the tubing is way over the top and way too much for the smaller proporsions of the 3.
There's an older post on this forum covering my bumper buildup if you want to take a look at the original design I was going with to what I have now. You might be able to get an idea or two. If you want any pics, PM me, or even contact Christian at THOR parts for some of his ideas.
Good luck!
#9
Can you post more pics? Like a str8 shot, not lower angle, I want to look at that gab by the center section of the grille. Also a side shot to see how far out it comes... and I see the holes for the fairlead but where does the winch mount? Thanks alot
-Dan
-Dan