H2 tire carrier pin replacement-
#1
H2 tire carrier pin replacement-
Hi All,
Since years are passing and the wire cable that holds the safety catch pin can age, fray, break etc.. I thought I would make this post to save you hours from searching for a pin & lead to attach it to the carrier latch...
Here is the pin on amazon that is near exact (other than being anodized) - works perfectly as a replacement - Monroe Hardware LBR-SS7109 1/4 X .75 17-4 Button Rapid Release PIN
For the leader, if you have the ability to crimp you can make one, If not here is a suggestion that doesnt involve crimping or buying cabling, etc-
135# musky fish leaders in a 8" (possibly a 6") length- you can get in a pack of 3 and use 2 of the stay lock snaps (one on each side) to pass through the hole on the carrier and the new pin. I doubled mine up - 2 leaders under one snap lock.
https://www.ebay.com/itm/121615393538
If anyone else has a source for the oem part I would love to see it- Just posting to save others hours of search to find the exact push pin for the carrier...
Chris
Since years are passing and the wire cable that holds the safety catch pin can age, fray, break etc.. I thought I would make this post to save you hours from searching for a pin & lead to attach it to the carrier latch...
Here is the pin on amazon that is near exact (other than being anodized) - works perfectly as a replacement - Monroe Hardware LBR-SS7109 1/4 X .75 17-4 Button Rapid Release PIN
https://www.amazon.com/Monroe-Hardware-LBR-SS7109-BUTTON-RELEASE/dp/B01HTZ2MAE/ref=sr_1_1?keywords=Monroe+Hardware+LBR-SS7109+1%2F4+X+.75+17-4+Button+Rapid+Release+PIN&qid=1580152664&sr=8-1
For the leader, if you have the ability to crimp you can make one, If not here is a suggestion that doesnt involve crimping or buying cabling, etc-
135# musky fish leaders in a 8" (possibly a 6") length- you can get in a pack of 3 and use 2 of the stay lock snaps (one on each side) to pass through the hole on the carrier and the new pin. I doubled mine up - 2 leaders under one snap lock.
https://www.ebay.com/itm/121615393538
If anyone else has a source for the oem part I would love to see it- Just posting to save others hours of search to find the exact push pin for the carrier...
Chris
#3
Glad it helped!! Pin still works perfect after 4 years. If anyone ever finds an oem solution - post it!
Amazon shows not available - did it quick search and this may be the same part. https://www.grainger.com/product/Quick-Release-Pin-Button-Handle-410K10
let us know how you make out.
Amazon shows not available - did it quick search and this may be the same part. https://www.grainger.com/product/Quick-Release-Pin-Button-Handle-410K10
let us know how you make out.
Last edited by Chrmer3; 03-18-2024 at 06:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
markdoddridge
PRIVATE For Sale / Trade Classifieds
16
04-27-2015 07:03 AM