2008 H2 Navigation & Clock default
#11
02-19-2019 | 09:18 PM
Senior Member
Joined: Apr 2010
Posts: 857
I lost the time in the nav system when I disconnected the battery overnight (to clear out fuel trim values after replacing the MAF). When I go to the time set screen, the buttons to set the time are there, but there are no numbers in the time display. Pressing the buttons results in a beep, but there is no time values displayed to change.
I will keep poking around and post any progress here...
I will keep poking around and post any progress here...
#16
02-20-2019 | 06:23 PM
Senior Member
Joined: Apr 2010
Posts: 857
The latest map disc V 2016 / 9.0 C has a radio software update on it, when you put the disc in the radio it will update the radio software.
I'm working to try and find out what the updates are specifically for the radio,
Neal
I'm working to try and find out what the updates are specifically for the radio,
Neal
Last edited by legerwn; 02-21-2019 at 10:16 AM.
#18
02-21-2019 | 10:15 AM
Senior Member
Joined: Apr 2010
Posts: 857
are you holding your finger in the very left hand lower corner of the screen? Keep it there for a little while, usually around 15 to 20 seconds. Try a few different positions but still in the lower left hand corner.
Try cleaning the screen prior to doing it,
Neal
Try cleaning the screen prior to doing it,
Neal
#19
02-21-2019 | 10:21 PM
Junior Member
Joined: Feb 2019
Posts: 8
From: Tampa, Florida
Neal,
Thanks for the suggestion.
I tried probably a dozen times last night holding my finger for up to a minute. This morning I tried again during my morning commute and after about 10 to 15 seconds the menu came up. I was able to reset my clock! SUCCESS!
THANKS
Thanks for the suggestion.
I tried probably a dozen times last night holding my finger for up to a minute. This morning I tried again during my morning commute and after about 10 to 15 seconds the menu came up. I was able to reset my clock! SUCCESS!
THANKS